Formulas
Flow qv [l/min] = Vg × n × ηv / 1000, where Vg is displacement in cm³ per revolution, n is speed in rpm and ηv is volumetric efficiency.
Drive torque M [Nm] = Vg × Δp / (20 × π × ηhm), where Δp is the differential pressure in bar and ηhm the hydraulic-mechanical efficiency.
Drive power P [kW] = 2π × M × n / 60000 = qv × Δp / (600 × ηt), with total efficiency ηt = ηv × ηhm. These are the formulas in Rexroth data sheet RE 92711.
Worked example
A 10 cm³/rev pump at 1450 rpm delivers 10 × 1450 / 1000 = 14.5 l/min with efficiencies set to 1.
At 45 bar the theoretical drive power is 14.5 × 45 / 600 ≈ 1.09 kW, and torque is 10 × 45 / (20 × π) ≈ 7.2 Nm. Real efficiencies are below 1, so the motor must supply more; take ηv and ηhm from the data sheet of the pump fitted.
Sizing the motor for a holding duty
Peak power occurs at full flow and full pressure. In a clamping or pressure-holding duty the circuit needs that power only while cylinders move; while pressure is held, a fixed pump that keeps running sends its flow over the relief valve and turns the power into heat.
Shanchuan SC-QT units, offered with 0.75 or 1.5 kW motors, stop the pump while pressure is held and restart it when pressure falls below the set level. Configuration for a given machine is confirmed from its duty data.
References
Formulas are taken from the following data sheet.
Sources
- Bosch Rexroth, Axial piston variable pump A10VSO series 31, data sheet RE 92711/2026-03-02, p. 7
FAQ
Frequently asked questions
What efficiency values should I use?
Use the volumetric and hydraulic-mechanical efficiencies in the data sheet of the pump fitted, at your speed and pressure. With both set to 1 the result is the theoretical minimum power.
Is differential pressure the same as gauge pressure?
Δp is outlet minus inlet pressure. When the pump draws from an open reservoir at about atmospheric pressure, the outlet gauge pressure is a close approximation.
How do I find the displacement for a required flow?
Rearrange the flow formula: Vg = 1000 × qv / (n × ηv). For 14.5 l/min at 1450 rpm and ηv = 1, Vg = 10 cm³/rev.